NANGYEAL provides environmental and reliability test on consignment basis!
- Based on our extensive experience in the field, we, NANGYEAL, secure advanced technologies in various environmental testing fields, and try out best to provide top-quality services to customers.
- We have many types of equipment for environmental test, and thus can meet the customers' specific needs and requirements, such as long-term or short-term test, small or large test specimen, and testing equipment rental, etc.
- If you consider purchasing a piece of environmental test equipment, you can check the performance test before purchasing it, and visit us at our facility to try it.
Reliability Test
- Reliability test assesses the characteristics and capacities of parts or products to maintain the initial quality and performance without an error for certain period, or their duration of use under given conditions or environments
- In order to prepare the products to be used under climatic stress or mechanical pressure, such as extreme heat, cold, humidity, or winds, we can conduct a test under the environmental conditions, both homogeneous and heterogeneous, and perform various other tests in preparation for changing temperature, humidity, altitude, temperature cycle, and corrosion.
- NANGYEAL applies the reliability standards of both domestic and international in automobile field, and carry out accurate and reliable testing.
Service Provided
Environmental Test
We provide reliable environmental tests to maintain the optimal performance of subject items by running a simulation with different environmental conditions in reference to the distribution process and use environment of the subject, then by analyzing the potential stress on the subject, and minimize the issues in advance.
- High/Low Temp. Test
- High Temp./High Humidity Test
- Temperature Cycle Test
- Thermal Shock Test
- Salt Spray Test
- Cyclic Corrosion Test
- IP (Waterproof/ Dust Resistance) Test
- HAST/PTC Test
- Ion-Migration Test
- Gas Corrosion Test
Mechanical Test
We provide durability test in preparation against damage and breakage of subject items by running a simulation through applying different mechanical stresses in reference to the distribution process and use environment of the subject.
- Vibration Test (Sine, Random)
- Shock Test
- Random Vibration Test
- Drop Test
- Tensile & Compressive Test
Reliability Test on Automotive Electronics Parts
We provide automotive electronics parts test by applying many different reliability standards in automobile filed, both domestic and international.
- HYUNDAI/KIA Automobiles [ES/MS Standards)
- GMW
- Ssangyong Motor [SES Standards]
- Foreign cars [Peugeot (PSA), Chrysler, Volvo, etc.]
Testing Equipment Rental Service
Customers can visit our facility to use our testing equipment to for their specific needs.
- Rental for 3, 6, 12 month-period
- Customized rental period set by individual consultation
Report Document Verification Service
· Verification service for customers to confirm the authenticity of the test report issued to them
· Staff in charge : Cho Eun-Ji, Deputy Manager
· Contact No : +81-70-4921-6586, +82-2-899-2356
· E-mail : joeunji@nyc02.com-
Test Requesting Procedure
Customer Support
For inquiries or consultation : +82-70-4921-6586, +82-2-899-2356
-
Testing Standards & Equipment
KOLAS Certified Testing Standards
Available Testing Equipment at NANGYEAL
Item Model Specifications Manufacturer Quantity Random Vibration Tester F-10000 BD/LA16BP up to 667 ㎨(68 G), DC to 2 000 Hz, Max load 200kg (-60 ~ +150) ℃, 800 mm x 800 mm EMIC Random Vibration Tester FH-35K/60 up to 1000 ㎨(100 G), DC to 2 000 Hz, Max load 400kg (-60 ~ +150) ℃, 800 mm x 800 mm EMIC HAST (PCT) PC-304R7 (105.0 ~ 162.5) ℃, (65 ~ 100) % R.H. 300 Φ x 373 mm(D), 26 L HIRAYAMA HAST (PCT) NY-HS-301 (105 ~ 142.9) ℃, (60 ~ 100) % R.H., 85℃/85%R.H. 350 mm(W) x 450 mm(D) x 400 mm(H) NYC Tensile & Compressive Tester DUT-200CM Test Load : Max. 200kg.f, Test Speed : 1~500 mm/min 대경 Eng. Drop Tester KD-128A (30 ~ 130) ㎝, 60 ㎏ 80 mm(W) x 80 mm(D) x 80 mm(H) KING DESIGN Dust Tester SPKR400 IP 1/2/3/4/5/6, S1/S2, R1/R2, Turn table : 300mm 1180 mm(W) x 1180 mm(D) x 1500 mm(H) iTS Dust Tester SK1000 Internal Volume : 1000 liters Additional flow meter 0-60 l/h iTS Salt Spray Tester SF-960-CCT RT ~ 35 ℃, 85 % R.H. 900 mm(W) x 600 mm(D) x 600 mm(H), 1~2 ㎖/80㎠/h CME Ion-Migration Measuring System NY-IM1016 (16CH) Type: 16CH (8CH/Group), Bias Voltage:1.0V ~ 250.0V DC: 0.1pA ~ 500uA, Resistance : 105Ω ~ 1014Ω, 482 mm(W) x 355 mm(D) x 523 mm(H) NYC Ion-Migration Measuring System NY-IM1064 (64CH) Type: 64CH (8CH/Group), Bias Voltage:1V~250V DC: 0.1pA ~ 500uA, Resistance : 105Ω ~ 1014Ω, 482 mm(W) x 355 mm(D) x 523 mm(H) NYC Large Capacity Thermal Shock Tester ES-1006L/LH (-65 ~ 200) ℃, 1080 L 1450 mm(W) x 1000 mm(D) x 750 mm(H) HITACHI Thermal Shock Tester (Portable) IX-06028-3 (-70 ~ 200) ℃, (-45 ~ 135) ℃: 5min 이내, 216 L, 470 mm(W) x 485 mm(D) x 460 mm(H) INABAYA Thermal Shock Tester (Portable) TSS-701130 Hot : (50.0 ~ 220.0) ℃, Cold : (-80.0 ~ 100.0)℃ Transfer time for between hot & cold chamber < 10 s Two-zone elevator type, 130 L CTS Thermal Shock Tester (Portable) LTS-1000T-W (-65 ~ +25) ℃, (+50 ~ +150) ℃ Transfer time < 5 s, Liquid type thermal shock HUTECH Thermal Shock Tester (Portable) ES-206LHH(-R) (-65 ~ 200) ℃, 200 L 630 mm(W) x 690 mm(D) x 460 mm(H) HITACHI Thermal Shock Tester (Portable) ES-106LHH(-R) (-65 ~ 200) ℃, 100 L 470 mm(W) x 485 mm(D) x 460 mm(H HITACHI Constant Temp. & Humidity Chamber EC-385MHP(-R) (-70 ~ +100) ℃, (20 ~ 95) % R.H. 1~2 ℃/min, 3780 L 1400 mm(W) x 1800 mm(D) x 1500 mm(H) HITACHI Constant Temp. & Humidity Chamber (High-rate cycle) EC-85EXHH20 (20 ℃/min) (-70 ~ +150) ℃, (20 ~ 95) % R.H. 20 ℃/min, 800 L 1000 mm(W) x 800 mm(D) x 1000 mm(H) HITACHI Constant Temp. & Humidity Chamber (High-rate cycle) EC-35EXT (10 ℃/min) (-70 ~ +150) ℃, 10 ℃/min, 306 L 630 mm(W) x 540 mm(D) x 900 mm(H) HITACHI Constant Temp. & Humidity Chamber (High-rate cycle) EC-35EXH (10 ℃/min) (-70 ~ +150) ℃, (20 ~ 98) % R.H. 10 ℃/min, 306 L 630 mm(W) x 540 mm(D) x 900 mm(H) HITACHI Constant Temp. & Humidity Chamber (High-rate cycle) EC-85EXH (5 ℃/min) (-70 ~ +150) ℃, (20 ~ 98) % R.H. 5 ℃/min, 800 L 1000 mm(W) x 800 mm(D) x 1000 mm(H) HITACHI Constant Temp. & Humidity Chamber EC-46MHHP (-40 ~ +150) ℃, (20 ~ 98) % R.H. 2~3 ℃/min, 408 L 630 mm(W) x 720 mm(D) x 900 mm(H) HITACHI Constant Temp. & Humidity Chamber EC-86MHHPE (-40 ~ +150) ℃, (20 ~ 98) % R.H. 2~3 ℃/min, 800 L 1000 mm(W) x 800 mm(D) x 1000 mm(H) HITACHI Constant Temp. & Humidity Chamber EC-85LHHP (-70 ~ +150) ℃, (20 ~ 98) % R.H. 1~2 ℃/min, 800 L 1000 mm(W) x 800 mm(D) x 1000 mm(H) HITACHI Constant Temp. & Humidity Chamber EC-85MHHP (-40 ~ +150) ℃, (20 ~ 98) % R.H. 1~2 ℃/min, 800 L 1000 mm(W) x 800 mm(D) x 1000 mm(H) HITACHI Resistance Measuring Instrument for Conductor NY-CR040 Type : 10CH x 4Group (Max.:160CH),
Range of measurement : 1μΩ ~ 45KΩ,
Method : 4-Terminal Measurement Technique,
430mm(W) × 320mm(D)×236 mm(H)NYC 1 대 Gas Corrosion Tester (To be available soon) 예정 예정 예정 예정 Equipment Per Test Subject